Please Whitelist This Site?

I know everyone hates ads. But please understand that I am providing premium content for free that takes hundreds of hours of time to research and write. I don't want to go to a pay-only model like some sites, but when more and more people block ads, I end up working for free. And I have a family to support, just like you. :)

If you like The TCP/IP Guide, please consider the download version. It's priced very economically and you can read all of it in a convenient format without ads.

If you want to use this site for free, I'd be grateful if you could add the site to the whitelist for Adblock. To do so, just open the Adblock menu and select "Disable on tcpipguide.com". Or go to the Tools menu and select "Adblock Plus Preferences...". Then click "Add Filter..." at the bottom, and add this string: "@@||tcpipguide.com^$document". Then just click OK.

Thanks for your understanding!

Sincerely, Charles Kozierok
Author and Publisher, The TCP/IP Guide


NOTE: Using software to mass-download the site degrades the server and is prohibited.
If you want to read The TCP/IP Guide offline, please consider licensing it. Thank you.

The Book is Here... and Now On Sale!

Read offline with no ads or diagram watermarks!
The TCP/IP Guide

Custom Search







Table Of Contents  The TCP/IP Guide
 9  TCP/IP Application Layer Protocols, Services and Applications (OSI Layers 5, 6 and 7)
      9  TCP/IP Network Configuration and Management Protocols (BOOTP, DHCP, SNMP and RMON)
           9  TCP/IP Network Management Framework and Protocols (SNMP and RMON)

Previous Topic/Section
SNMP Version 3 (SNMPv3) Message Format
Previous Page
Pages in Current Topic/Section
1
23
Next Page
TCP/IP Key Applications and Application Protocols
Next Topic/Section

TCP/IP Remote Network Monitoring (RMON)
(Page 1 of 3)

The Simple Network Management Protocol (SNMP) defines both a framework and a specific protocol for exchanging network information on a TCP/IP internetwork. The general model used by SNMP is that of a network management station (NMS) that sends requests to SNMP agents running on managed devices. The SNMP agents may also initiate certain types of communication by sending trap messages to tell the NMS when particular events occur.

This model works well, which is why SNMP has become so popular. However, one fundamental limitation of the protocol and the model it uses is that it is oriented around the communication of network information from SNMP agents that are normally part of regular TCP/IP devices, such as hosts and routers. The amount of information gathered by these devices is usually somewhat limited, because obviously hosts and routers have “real work to do”—that is, doing the jobs of being hosts and routers. They can't devote themselves to network management tasks.

Thus, in situations where more information is needed about a network than is gathered by traditional devices, administrators often use special hardware units called network analyzers, monitors or probes. These are dedicated pieces of equipment that are connected to a network and used strictly for the purpose of gathering statistics and watching for events of interest or concern to the administrator. It would obviously be very useful if these devices could use SNMP to allow the information they gather to be retrieved, and to let them generate traps when they notice something important.

To enable this, the Remote Network Monitoring (RMON) specification was created. RMON is often called a protocol, and you will sometimes see SNMP and RMON referred to as “the TCP/IP network management protocols”. However, RMON really isn't a separate protocol at all—it defines no protocol operations. RMON is in fact part of SNMP, and the RMON specification is simply a management information base (MIB) module that defines a particular set of MIB objects for use by network monitoring probes. Architecturally, it is just one of the many MIB modules that comprise the SNMP Framework.

Key Concept: SNMP Remote Network Monitoring (RMON) was created to enable the efficient management of networks using dedicated management devices such as network analyzers, monitors or probes. RMON is often called a “protocol”, but does not in fact define any new protocol operations; it is a MIB module for SNMP that describes objects that permit advanced network management capabilities.


RMON Standards

The first standard documenting RMON was RFC 1271, Remote Network Monitoring Management Information Base, published in 1991. RFC 1271 was replaced by RFC 1757 in 1995, which made a couple of changes to the specification. RFC 2819, May 2000, updates RMON to use the new Structure of Management Information version 2 (SMIv2) specification that is part of SNMPv2 but is functionally the same as RFC 1757.


Previous Topic/Section
SNMP Version 3 (SNMPv3) Message Format
Previous Page
Pages in Current Topic/Section
1
23
Next Page
TCP/IP Key Applications and Application Protocols
Next Topic/Section

If you find The TCP/IP Guide useful, please consider making a small Paypal donation to help the site, using one of the buttons below. You can also donate a custom amount using the far right button (not less than $1 please, or PayPal gets most/all of your money!) In lieu of a larger donation, you may wish to consider purchasing a download license of The TCP/IP Guide. Thanks for your support!
Donate $2
Donate $5
Donate $10
Donate $20
Donate $30
Donate: $



Home - Table Of Contents - Contact Us

The TCP/IP Guide (http://www.TCPIPGuide.com)
Version 3.0 - Version Date: September 20, 2005

© Copyright 2001-2005 Charles M. Kozierok. All Rights Reserved.
Not responsible for any loss resulting from the use of this site.